 Intelligent Charger |
||||||||||
|
|
ZA-Ⅱ-48V/50A |
||||||||
ZA-II series micro-control intelligent charger is the third generation of high performance-cost ratio product,which is launched by our company that the accurate charging process and algorithm are made through the repeated experiments on the basis of research&development and manufacturing of the charger and full understanding of battery characteristics many years. Notes 1) Input voltage: power source voltage can be changed on requests |
| AC voltage Input | single-phase 220V±10%;Three-phase 380V±10%; (or user requirements: Three-phase 220V±10% ) |
| AC frequency Input | 50Hz or 60Hz |
| DC voltage output | Main charging voltage is set to the nominal voltage of1.23-1.35 times |
| DC current output | 10A, 20A, 30A, 40A, 50A, 60AThe? ?battery? ?capacity? ?of? ?about? ?14%? ?are? ?generally selected, or refer to the battery manual |
| Applicable???? battery voltage | 12V， ?24V，36V，48Vetc |
| Evenly charging current | Battery capacity of 4-6% |
| Sampling accuracy of voltage | ＜1% |
| Sampling accuracy of current | ＜1% |
| Storage? ?and? ?transportation environment | －40℃～80℃ |
temperature Working??environment |
-20℃~45℃, the air temperature directly adjacent to the electronic components does not exceed 70℃ |
humidity |
Relative humidity is less than 85 percent, non-dewfall |
| Altitude | Is not more than 2500m |
1,Intelligent charge control of computer entire process, LED and LCD are displayed in Chinese, and good human-computer interface.
2,Optimized Maas charging curve, constant current and constant voltage as well as pulse and charging combination, higher battery absorptive efficient.
3,The battery is not connected,reversal connected,under-voltage,over-voltage,over-temperature, full charged, and automatic detection and showing protection of the failure state.
4,Real-time monitoring display such as charging voltage,charging current,battery capacity, charging time, temperature and number of charging.
5,Where the AC power is connected,the battery is connected to automatic charge,the machine is started up with delaying and soft-start and the machine is automatically shut down after full charging.
6,Equipped with the charging mode such as conventional charging, evenly charging, initial charging.
7,The charging data is real-time recorded,the charging curve can be drawn andprinted by the computer communication.(Parts are selected and set up)
